7- ENG
A08987
OPERATING INSTRUCTIONS
BASIC ELEMENTS OF A
PRESSURE WASHER
High-pressure pump (located inside
the shroud): Increases the pressure
of the water supply.
Engine: Drives the high pressure
pump.
High-pressure hose:
Carries the
pressurized water from the pump to
the gun and spray wand.
Spray gun: Connects with spray
wand to control water flow rate,
direction, and pressure.
Multi-adjustable spray wand: Allows
the user to use high or low pressure
and adjusts from a pencil stream (0°)
to a wide angle fan spray (40°). See
How To Use Wand instructions in this
section.
Compare the illustrations with your unit to familiarize yourself with the location
of various controls and adjustments. Save this manual for future reference.
Engine
High-pressure
hose
Spray
gun
Multi-adjustable
spray wand
High-pressure
pump (located
inside the
shroud)
Detergent injection hose: Feeds
cleaning agents into the pump to
mix with the water. See How To
Apply Chemicals/Cleaning Solvents
instructions in this section.
BASIC ELEMENTS OF AN
ENGINE
Refer to the engine manual for
location and operation of engine
controls.
Choke control
: Opens and closes
carburetor choke valve.
Throttle control lever: Controls
engine speed.
Starter grip: Pulling starter grip
operates recoil starter to crank
engine.
Fig. 4
