Operating the sleep timer
The sleep timer allows the
system to continue to operate
for a specified period of time
before automatically shutting
off.
To set the receiver to
automatically turn off after
the specified period of time.
Each time this button is pressed, the sleep time
changes as follows:
10 20 30 60 90 OFF
Unit : minutes
While operating the sleep timer, “SLEEP” lights up.
When the sleep time is selected, all display panels of
Sherwood components connected by the DIGI LINK III
are dimly lit.
OTHER FUNCTIONS
14
RECORDING
Start recording on the TAPE.
2
Select the desired input as a recording
source except for TAPE.
1
Recording with TAPE
Start play on the desired input.
3
Start recording on the AUX.
2
Select the desired input as a recording
source except for AUX.
1
Recording with AUX
Start play on the desired input.
3
The volume, tone(bass, treble) and balance settings have no effect on the recording signals.
When you select tuner, CD or PHONO as a recording source, recording may be made on TAPE or AUX, or both
simultaneously.
Each time this button is pressed, the brightness of
all fluorescent displays of Sherwood components
connected by the DIGI LINK III changes together
as follows:
ON dimmer OFF
In the display OFF mode, pressing any button will
restore the display ON mode.
Adjusting the brightness of the
fluorescent displays
