ADN CU1 | 17
Configuring the conference system
“Audio Menu”
“XLR Out” Calls up the “XLR Out” submenu –
“XLR In” Calls up the “XLR In” submenu –
“Floor/Loudspeakers” Calls up the “Floor/Loudspeakers” submenu –
“Audio Gain Reduction” The sum signal of all active conference units is output via
the floor channel (“Floor/Loudspeakers”). The “Audio
Gain Reduction” menu item allows you to adjust how the
volume levels of the signals of the individual conference
units are processed.
“0.0 dB per Mic” ...
“−3.0 dB per Mic”,
“Linear Division”
“Feedback Suppression” Calls up the “Feedback Suppression” submenu –
“XLR Mix Minus” Activates the filtering of the IN audio input from the OUT
audio output in order to avoid, for example, double audio
signals during teleconferencing
“On”/“Off”
“Mic Loudspeaker Mute” Deactivates the conference units’ built-in loudspeakers
for contributions coming from the conference units’
microphones
“On”/“Off”
“Conference Recording” Calls up the “Conference Recording” submenu –
“XLR Out” menu
“XLR Out Status” Activates/deactivates the OUT audio output “On”/“Off”
“XLR Out Volume” Adjusts the volume of the XLR output
“01” ... “32”
“XLR Out Equalizer” Adjusts the tone color of the XLR output
“−12 dB” ... “+12 dB”
“XLR In” menu
“XLR In Status” Activates/deactivates the IN audio input “On”/“Off”
“XLR In Sensitivity” Adjusts the sensitivity of the XLR input
“−18.0 dBu” ... “+18.0 dBu”
“XLR In Equalizer” Adjusts the tone color of the XLR input
“−12 dB” ... “+12 dB”
Display Function of the menu item Option/display
XLR Out Volume
No
+ 6 dB
+ 6 dB
XLR Out Equalizer
No
+02 dB
–03 dB
+05 dB
XLR In Sensitivity
No
+07.5 dBu
+07.5 dBu
XLR In Equalizer
No
+02 dB
–03 dB
+05 dB
KA_ADN-CU1_546415_0911_SP13.book Seite 17 Donnerstag, 1. September 2011 11:00 11
