Configuring the conference system
16 | ADN CU1
Display Function of the menu item Option/display
“Main Menu”
“Conference Menu” Calls up the “Conference Menu” submenu –
“Audio Menu” Calls up the “Audio Menu” submenu –
“System Menu” Calls up the “System Menu” submenu –
“*Languages” Adjusts the language “Deutsch”, “English”,
“Espanol”...
“Settings” Calls up the “Settings” submenu –
“Conference Menu”
“Conference Mode” Adjusts the conference mode
“Direct Access”, “Override” and “Push To Talk”: These
conference modes do not require the use of a chairperson
unit. If the maximum number of speakers who can take
the floor simultaneously has not been reached, a further
speaker can take the floor immediately.
“Request”: For this mode to function, a chairman unit is
required. The chairperson receives requests to speak and
grants speaking privileges according to the FIFO principle
(First in – First out), i.e. the participant with the longest
waiting time is granted speaking privileges.
“Direct Access”, “Override”,
“Push To Talk” or “Request”
“Microphone Limit” Sets the maximum number of speakers who can take the
floor simultaneously for all conference modes
“1” ... “10”
“Request Limit” Sets the maximum number of requests to speak for
“Request” and “Direct Access” mode
“0” ... “10”
“Talk Time Status” Activates/deactivates the speaking time limit “On”/“Off”
“Talk Time Limit” Sets the speaking time limit “01” ... “60”
in steps of 1 minute
“Premonition Time Limit” Sets the advance warning time (warns speakers that they
are approaching the end of the individual speaking time)
“00” ... “120”
in steps of 10 seconds
“Reaction on Talktime Exceed” Determines the behavior when the individual speaking
time is exceeded
“Continue”: The individual speaking time is continued.
“Cancel”: The individual speaking time is terminated.
“Continue”/“Cancel”
“Blink on Request” Activates/deactivates the flashing of the signal light ring
when a request to speak is made
“On”/“Off”
“Re-Init” Re-initializes the conference units
If you connect ADN C1 chairperson units to the conference
system during a running conference, you have to re-
initialize them. When conference units are re-initialized,
the conference will be interrupted.
“Yes”/“No”
“Clear Request List on Cancel” Sets the function of the priority key of the chairperson
unit
“On”: Pressing the priority key deactivates all ADN D1 del-
egate units. All requests to speak are deleted.
“Off”: Pressing the priority key deactivates all currently
active ADN D1delegate units. All requests to speak are
retained.
“On”/“Off”
KA_ADN-CU1_546415_0911_SP13.book Seite 16 Donnerstag, 1. September 2011 11:00 11
