ENGLISH
54
Playing back the Tape
Various Functions in PLAYER mode
To view a STILL picture (Playback pause)
- Press (PLAY/STILL) button during playback.
- To resume playback, press (PLAY/STILL) button again.
Note:
Your camcorder will automatically stop if it is left for
more than 5 minutes in STILL mode without operation
in order to prevent tape and head-drum wear.
To locate a scene (picture search)
- Press (FF) or (REW) buttons during playback.
To resume normal playback, release the buttons.
Zero RETURN (VP-L610/L610B/L630/L650)
✤ The ZERO RETURN function works in STOP of PLAYER mode.
✤ You can Fast Forward or Rewind to 0:00:00 automatically.
1. Set the power switch to PLAYER mode.
■ Make sure that STOP is displayed.
2. Press the Z.RTN button of the Remote Controller.
■ Z.RTN should displayed.
■ FF or REW works automatically.
Notes:
■ The Z.RTN button does not work when the TAPE
COUNTER reads 0:00:00.
■ Set the COUNTER RESET to “C.RESET 0:00:00” in MENU mode at the start of the cassette
or the required sequence.
When you wish to find this point on the tape again, press Z.RTN button when playback is stopped.
