troubleshooting
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not adjust
automatically.
• Set “
Focus” to “Auto.”
page 70
• The recording conditions are not suitable for auto focus.
Adjust the focus manually.
page 70
• The lens is dusty on the surface. Clear the lens and check the focus.
The image appears too bright or
flickering, or changes in colour.
• This may occur when you make a recording under a fluorescent, sodium or
mercury lamp.
Cancel “Scene Mode (AE)” to avoid or minimise the phenomena.
page 65
Image’s colour balance is not
natural.
• White balance adjustment is required. Adjust to the proper “
White Balance.”
page 66
Playback on your DVD camcorder
Symptom Explanation/Solution
Using the playback (Play/Pause)
function does not start playing.
• Press the
MODE button to set to the Play mode.
• Images recorded using another device may not be played on your DVD camcorder.
• Select a proper storage media. (VP-DX103(i)/DX104/DX105(i) only)
page 30
• Check out the memory card compatibility.
page 52~54
The Skip or Search function does
not work properly.
• If the temperature inside the camcorder is too high, it may not function properly.
Turn the camcorder off, and turn it on again a little later.
(AD68-02550G) VP-DX100_ENG_IB.indb 110 2008-03-06 ¿ÀÈÄ 2:31:22
