Playback
✤ The Playback function works only in Player mode.
✤ You can monitor the playback picture on the LCD screen.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(VP-D453(i)/D454(i)/D455(i) only)
3. Insert the tape you wish to view.(see page 36)
4. Open the LCD screen.
■ Adjust the angle of the LCD screen and set the
brightness or colour if necessary.
5. Press the (REW) button to rewind the tape to
the starting point.
■ To stop rewinding, press the (STOP) button.
■ The Camcorder stops automatically after
rewinding is complete.
6. Press the (PLAY/STILL) button to start
playback.
■ You can view the picture you recorded on the
LCD screen.
■ To stop the play operation, press the (STOP)
button.
✤ You can adjust the LCD Bright/Colour during
playback.
✤ The adjustment method is the same procedure as
used in Camera mode.(see page 32)
[ Notes ]
■ You can also view the picture on a TV screen, after connecting the
Camcorder to a TV or VCR.(see pages 70~71)
■ Various functions are available in Player mode.(see page 72)
■ For searching and viewing still images recorded onto tape.
(see page 67)
Playing back a Tape you have recorded on the LCD
Screen
Adjusting the LCD Bright/Colour during Playback
ENGLISH
6868
✤ Player
✤
1. PlAYER
2. TAPE
( VP-D453(i)/D454(i)/D455(i))
3. 36
4.
■
5. REW
■ STOP
■
6. PLAY/STILL
■
■ STOP
✤
✤ Camera
32
■
70 71
■ Player 72
■ 67
1
3
5
