ENGLISH
8080
IEEE 1394 Data Transfer
■
CPU: faster Intel
®
Pentium III™ 450MHz compatible.
■
Operating system: Windows
®
98SE, ME, XP, Mac OS (9.1~10.2)
■
Main memory: more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(VP-D353i/D354i/D355i only)
3. Connect the DV cable (not supplied) from the
DV jack of the Camcorder to the DV jack of the
other DV device.
■
Make sure that is displayed on the
LCD screen.
4. Press the Start/Stop button to begin REC
PAUSE mode.
■
PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the picture.
6. Press the Start/Stop button to start recording.
■
If you want to pause recording momentarily, press the Start/Stop button
again.
7. To stop recording, press the (STOP) button.
[ Notes ]
■
When using this Camcorder as a recorder, the pictures that appear on a
monitor may seem uneven, however recorded pictures will not be affected.
■
Operation is not guaranteed for all the recommended computer environments
mentioned above.
■
While transmitting data from the Camcorder to PC at strong electric field and
strong magnetic field, VIDEO signal or AUDIO signal may transmit with noise.
Recording with a DV Connection Cable (VP-D351i/D352i/D353i/D354i/D355i only)
System Requirements
IEEE 1394
■
®
™
■
®
■
■
■
■
■
■
■
■
DV VP-D351i/D352i/D353i/D354i/D355i
