ENGLISH
6969
Playback
✤ The playback function works only in Player mode.
✤ You can monitor the playback picture on the LCD screen.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(VP-D353(i)/D354(i)/D355(i) only)
3. Insert the tape you wish to view. (see page 36)
4. Open the LCD screen.
■
Adjust the angle of the LCD screen and set the
brightness or colour if necessary.
5. Press the (REW) button to rewind the tape to the
starting point.
■
To stop rewinding, press the (STOP) button.
■
The Camcorder stops automatically after rewinding is
complete.
6. Press the (PLAY/STILL) button to start playback.
■
You can view the picture you recorded on the LCD
screen.
■
To stop the play operation, press the (STOP) button.
✤ You can adjust the LCD Bright/Colour during playback.
✤ The adjustment method is the same procedure as used in
Camera mode. (see page 32)
[ Notes ]
■
You can also view the picture on a TV screen, after
connecting the Camcorder to a TV or VCR.
(see page 71~72)
■
Various functions are available in Player mode.
(see page 73)
■
For searching and viewing still images recorded onto tape. (see page 68)
Playing Back a Tape You have recorded on the
LCD Screen
Adjusting the LCD Bright/Colour during Playback
✤
✤
■
■
■
■
■
✤
✤
■
■
■
1
3
5
