Phone Basics
2A. Phone Basics 19
3. Press . (To make an outgoing call when you
are roaming and Call Guard is enabled, press
and then press . See “Call Guard” on
page 88.)
4. Press or close the phone when you are
finished.
You can also place calls from your phone by speed
dialing numbers from your Contacts (page 27), using
Voice Dial (page 72), using your History listings
(page 51), and Voice Services (page 72).
Dialing Options
When you enter numbers in standby mode, you will
see a variety of dialing options displayed as softkeys on
the phone’s screen.
To send a message to the number, press
Send Msg
(left softkey).
– or –
To initiate an option, press
Options (right softkey), then
press the corresponding softkey.
ⅷ Contact Details: Displays the details for a Contact if the
entered number matches a previously created entry.
ⅷ Save: Enter a seven-digit or ten-digit number (phone
number and area code) and press
Options (right
softkey)
> Save to save the phone number in your
Contacts. (See “Saving a Phone Number” on
page 23.)
Tip
To redial your last outgoing call, press twice.
To redial other recent numbers, press , highlight
a number, and press again.
When making calls off the Sprint Nationwide
Network, always dial using 11 digits (1 + area code +
phone number).
Tip
To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see “Assigning
Speed Dial Numbers” on page 57.) (This feature will
not work when you are roaming off the Sprint
Nationwide Network; when roaming you must dial
using eleven digits [1 + the area code + the seven-
digit phone number].)
Sprint M240.book Page 19 Sunday, July 26, 2009 11:11 AM
