press <OK>.
5. If you have selected Custom, press <Back> for at least two
seconds to erase the existing greeting.
Type in the new greeting and then press <OK> to save. For
further information for text entry, refer to "Entering
Characters".
Selecting the Backlight Time Length
The backlight setting lets you select how long the display screen
and keypad are backlit after any key press is made or the flip
cover is opened.
1. From Standby mode, press <Menu> Softkey for the Main menu.
2. Select 7:Setings.
3. Select 1:Display and then 5:Backlight and then 1:main Display.
4.
Select from the following options: Flip Open, 30 Seconds, 15 Seconds, 8
Seconds.
5. Press <OK> to save and exit.
Note: Long backlight settings affect the battery’s talk and standby times.
Sound Settings
Adjusting the Ringer Volume
1.
From Standby mode, press <Menu> for the Main menu.
2. Select 1:Settings.
3. Select 2:Sounds.
4. Select 1:Ringer Volume. The following options display: Calls
and Messages and Alarms.
5.
Select Calls for voice call ringer or Messages for message
alert or Alarms for alarm alert.
6. Scroll to the desired option using the navigation key and
press <OK>.
Tip: You can use the volume keys located on the side of the phone to
adjust the ringer volume in Standby mode with the flip open or the voice
volume during a call.
Selecting Ringer Types
Ringer types help you identify incoming calls, messages, data/
faxes and schedule events.
To select a ringer type for voice calls:
1. From Standby mode, press <Menu> for the Main menu.
2. Select 1:Settings.
3. Select 2:Sounds.
4. Select 2:Ringer Type and then 1:Voice Calls.
5. Select either With Caller ID or No Caller ID, and press <OK>.
6. Select the ringer category by pressing the navigation key left
or right. Then press the navigation key down to move to
Type. Select the desired ringer type by pressing the
navigation key left or right.
7. Listen to the available ringer types and press <OK> to select.
Tip:
If your ringer is set to Vibrate or Off, you can review the ringer types
but will not hear them.
To select a ringer type for messages:
1. From Standby mode, press <Menu> for the Main menu.
2. Select 1:Settings.
