SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
6-6
This Document can not be used without Samsung's authorization
11 12
13 14
15 16
1)Putsidekeysontherightdirections,then
lock two hooks on the top of the rear cover.
After locking two hooks, press the rear cover
slightly to assemble two covers.
1) Press the rear cover part around the red
circle area slightly to lock the left hook on
the rear cover.
1) Place the PBA pushing out two hooks in
the red circles slightly.
1) Put on the receiver into the hole of the
front cover, the receiver connector, the motor
connector, the LCD connector, and the key
connector on the right positions firmly.
1) Put some adhesive on the soldered motor
wire. Be careful not to get an adhesives on
the antenna contact or the flash LED near the
motor wire.
1) Put the camera connector on the connector
on the PBA firmly.
