SAMSUNG Proprietary-Contents may change without notice
6. Disassembly and Assembly instructions
6-1
This Document can not be used without Samsung's authorization
6-1. Disassembly
1
1) Put the antenna in the right position caring
about that the hook is properly lock it.
Then screw the antenna.
1) Place and stick the KEY FPCB properly with
checking out that four poles in the red circles
are in the middle of holes of the KEY FPCB.
1) Remove the cover of the tape on the
bottom of the motor, stick the motor on the
frame. Press the motor slightly to stick the
motor firmly.
2
3 4
1)Removethecoveronthetapestuckon
the frame insert the LCD connector through
theholeintheframe.Placeandstickthe
bottom right corner of the LCD to the red
guide line in the blue circle.
5 6
1) Remove the cover of the tape on the
bottom of the motor, stick the motor on the
frame. Press the motor slightly to stick the
motor firmly.
1) Remove the cover of the tape on the
bottom of the motor, stick the motor on the
frame. Press the motor slightly to stick the
motor firmly.
