68
entering the numbers each time, you can store the numbers in
your Contacts along with special characters called pauses.
To add a pause to a Contact:
1. Touch , and then touch the image icon or name to
open the Contact.
2. Touch
and then select the desired phone number.
3. Touch the
Phone Number
field and then touch the screen at
the place where the additional numbers need to be added.
4. Press to add a two-second pause, and use the keypad
to enter the additional numbers.
Note:
If more than a two-second pause is required, press as many times
as needed to add additional two-second pauses.
5. Touch .
6. Touch to store your changes.
Using Contacts
Dialing a Number from Address Book
Once you have stored phone numbers in the Address Book, you
can dial them easily and quickly by either using their SIM card
location number or by using the Search field to locate the entry.
Note:
The default Address Book entries are: *Now - *669, Check Bill Balance
- *225#, Customer Care - 1-800-331-0500, Directory Assistance -
411, Pay My Bill - *729, View Data Usage - *3282#, View My Minutes -
*646#, Voice Dial - *08, and Music ID - #43.
Finding an Address Book Entry
You can store phone numbers and their corresponding names
onto your SIM card and phone’s onboard memory. The two
locations are physically separate but are used as a single entity,
called the Address Book.
Depending on your particular SIM card, the maximum number of
phone numbers the SIM card can store and how they are stored
may differ.
1. In Idle mode, touch ➔
Address Book
➔
Contacts
.
OK
a797 Bourbon.book Page 68 Tuesday, November 17, 2009 1:53 PM
