Changing Your Settings 49
2.
Touch the
Screen Text
field, touch one of the following
selections and touch :
•Automatic
(uses the language set on your SIM card).
• English
•Français
•Español
3. Touch the
Input Language
field, touch one of the following
selections and touch :
• English
•Français
•Español
4. Touch to return to Phone settings page.
Vibration Feedback
You can set the level of vibration intensity that occurs when you
touch the screen.
1. From Idle mode, touch ➔
Settings
➔
Phone
➔
Vibration Feedback
.
2. Drag the
Vibration Intensity
slider to the intensity level you
desire (range is 0-4).
3. Touch
Save
.
Calibration
The Calibration feature allows you to re-align the screen’s touch
accuracy. Use this feature only when the device does not respond
properly when you touch the screen.
1. From Idle mode, touch ➔
Settings
➔
Phone
➔
Calibration
.
2. Touch the center of each target and repeat this step for all
four targets displayed.
The new settings are automatically saved.
Note:
When touching the screen in Calibration mode, you must touch the
center of the cross hair area.
QWERTY Slide Setting
This setting allows you to choose what will be displayed on the
main screen when you slide open your phone.
1. From Idle mode, touch ➔
Settings
➔
Phone
➔
QWERTY Slide Setting
.
2. Touch
Off
,
Create New Message
,
IM
,
or
Mobile Email
. If you
choose
Off
, the Idle screen will display when you slide
open your phone.
3. Touch
Save
.
Save
Save
a797 Bourbon.book Page 49 Tuesday, November 17, 2009 1:53 PM
