Changing Your Settings 51
3.
At the
Calibration completed. Save new setting?
prompt,
touch
Yes
to save or
No
to cancel.
Note:
When touching the screen in Calibration mode, you must touch the
center of the cross hair area.
Motion Detection
The Motion Detection feature can be used for muting an
incoming call or alarm, setting Snooze on an alarm, and starting
and restarting a timer.
1. From Idle mode, touch ➔
Settings
➔
Phone
➔
Motion Detection
.
2. Touch
On
to activate the Motion Detection feature, or touch
Off
to deactivate it.
For more information on using Motion Detection on your phone,
see the following:
• To mute the ringer -
see
“Other Answering Options”
on page 29.
•
To mute an alarm - see
“Turning Off an Alarm”
on page 137.
•
To start or restart a timer - see
“Timer”
on page 142.
Auto Keypad Lock
The Auto Keypad Lock feature locks your phone when the
Backlight turns off. To modify this feature, follow these steps:
1. From Idle mode, touch ➔
Settings
➔
Phone
.
2. Touch
On
or
Off
from the
Auto Keypad Lock
field.
For information on setting the Backlight time settings, see
“Backlight Time” on page 48.
For information on the Smart Unlock feature, see “Smart Unlock”
on page 55.
Security
The Security feature enables you to restrict the use of your phone
by others and to restrict the types of calls.
Various codes and passwords are used to protect the features of
your phone.
ᮣ
From Idle mode, touch ➔
Settings
➔
Phone
➔
Security
.
Lock Phone
When the Lock Phone feature is enabled, the phone is locked and
you must enter the 4 to 8 digit phone password each time the
phone is switched on.
Note:
You will be prompted to create a password the first time this feature is
enabled.
To change the phone password, see “Change Phone Password”
on page 53. Once you enter the correct password, you can use
the phone until you switch it off.
a697 Crescent.book Page 51 Thursday, March 4, 2010 11:42 AM
