ENGLISH
Advanced Recording
6666
✤ The NITE PIX function works in CAM/M.REC mode.
✤ The NITE PIX function enables you to record a subject in darkness.
1. Set the camcorder to CAM mode.
2. Slide the NITE PIX switch to ON.
■
(NITE PIX indicator) appears on the LCD monitor.
■
The infrared(invisible rays) light is turned on automatically.
3. To cancel the NITE PIX function, slide the NITE PIX switch to OFF.
Notes
■
The maximum recording distance using the infrared light is about 3 m (about 10 feet).
■
If you use the NITE PIX function in normal recording situations (ex. outdoors by day),
the recorded picture may be tinted green.
■
In the NITE PIX mode, certain functions are not available, such as White Balance, Program AE, DSE, BLC.
■
If focusing is difficult with the auto focus mode when using the NITE PIX function, focus manually.
NITE PIX (0 lux recording)
NITE PIX
0 : 0 0 : 0 0
6 0 min
STBY
00654B SCD30-SEA (60~107) 5/6/03 8:53 AM Page 66
