![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/1/f0/1f04321b-447d-08a4-f97c-ea11cd980a02/1f04321b-447d-08a4-f97c-ea11cd980a02-bg27.png)
ESPAÑOLENGLISH
Basic Recording
3939
Making your First Recording
1. Connect a power source to the
Camcorder. (see page 20)
(ABattery pack or a AC Power adapter)
Insert a cassette. (see page 36)
2. Remove the Lens cover.
3. Set the Power switch to CAMERA.
■
Open the LCD screen.
■
Set the Mode switch to TAPE.
(SC-D353/D354/D354M/D355 only)
Make sure that STBY is displayed.
■
If the write protection tab of the
cassette is open(set to save), STOP
and Protection ! will be displayed.
Release the write protection tab to record.
■
Make sure the image you want to record appears on the LCD screen or
Viewfinder.
■
Make sure the battery level indicates that there is enough remaining power
for your expected recording time.
4. To start recording, press the Start/Stop button.
■
REC ● is displayed on the LCD screen.
To stop recording, press the Start/Stop button again.
■
STBY is displayed on the LCD screen.
[ Note ]
Detach the Battery pack when you are finished recording to prevent
unnecessary battery power consumption.
Grabación básica
Primera grabación
1. Conecte a la cámara a una fuente de
alimentación. (Consulte la página 20.)
(Una batería o un adaptador de CA.)
Introduzca un casete.
(Consulte la página 36.)
2. Retire la tapa del objetivo.
3. Coloque el interruptor Power en
CAMERA.
■
Abra la pantalla LCD.
■
Coloque el interruptor Mode en
TAPE. (Sólo SC-D353/D354/
D354M/D355) Asegúrese de que
aparece STBY.
■
Si la pestaña de protección del casete está abierta (protegida), aparecerá
STOP y Protection ! <Protección !>. Libere la pestaña de protección
contra escritura para grabar.
■
Asegúrese de que la imagen que desea grabar aparezca en la pantalla
LCD o en el visor.
■
Asegúrese de que el nivel de la batería indique que tiene suficiente
energía para grabar durante el tiempo deseado.
4. Pulse el botón Start/Stop para empezar a grabar.
■
Aparece REC ● en la pantalla LCD.
Para detener la grabación, pulse de nuevo el botón Start/Stop.
■
Aparece STBY en la pantalla LCD.
[ Nota ]
Retire la batería al terminar de grabar para evitar un consumo innecesario de la
misma.
4
1
3
2
√
√
00839E SCD353 USA+ESP~086 4/4/05 10:43 AM Page 39