25
2.
Say “Call”. VoiceSignal prompts you to “Say the name or
#”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays and prompts you with “Call?” followed
by a choice list of up to three numbers.
4. Do one of the following:
•
Touch one of the number buttons.
•
Say “
Yes
” to confirm the first number.
•
Say “
No
” to hear the next number.
•
Say “
Repeat
” to hear the numbers again.
•
Say “
Cancel
” to exit Voice Service without dialing.
(For more information, refer to “Confirmation” on
page 87.)
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains hard Waits, wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
•
If you voice dial a contact that contains (two-second) 2-Sec Pause(s)
simply wait for the pauses to pass and the dialing to complete.
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ring tone sounds and/or your phone vibrates (Your phone provides
nine ring volume settings including:
Silent all
,
Alarm only
,
Vibrate
only
,
1 Beep
,
Low
,
Low/Medium
,
Medium
,
Medium/High
, or
High
, and/or
different ring types to distinguish callers.)
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
•
If the caller can’t be identified,
Call from unavailable#
,
Call from
restricted number
, or no number appears in the display.
•
Your phone continues to notify you of the call until one of the following
events occurs:
•
You answer the call.
•
You ignore the call.
•
The calling party ends the call.
•
The call is sent to voicemail.
Answering an Incoming Call
ᮣ
Touch the key. The ring tone and/or vibration stop
and the caller’s voice can be heard in the earpiece.
