System Settings
64
2
❖ SMTP Server
Specify the SMTP server name.
When using DNS, enter the host name.
When not using DNS, enter the SMTP server IPv4 address.
•Server Name
• Port No.: 25
Enter [Server Name] using up to 127 characters. Spaces cannot be entered.
Enter [Port No.] between 1 and 65535 using the number keys, and then press
the [OK] key.
❖ SMTP Authentication
Specify SMTP authentication (PLAIN, LOGIN, CRAMMD5, DIGEST-MD5).
When sending e-mail via an SMTP server, you can enhance the level of SMTP
server security using authentication that requires a user name and password
to be entered.
If the SMTP server requires authentication, set [SMTP Authentication] to [On],
and then specify [User Name], [Password], and [Encrypt].
Enter the user name and password to be set for [Key Operator's E-mail Add.]
when using Internet Fax.
•On
•User Name
Enter [User Name] using up to 191 characters. Spaces cannot be entered.
Depending on the SMTP server type, “realm” must be specified. Add
“@” after the user name, as in “user name@realm”.
• E-mail Address
• Password
Enter [Password] using up to 63 characters. Spaces cannot be entered.
• Encrypt: Auto/On/Off
[Encrypt]-[Auto]: Use if the authentication method is PLAIN, LOGIN,
CRAM-MD5, or DIGEST-MD5.
[Encrypt]-[On]: Use if the authentication method is CRAM-MD5 or DI-
GEST-MD5.
[Encrypt]-[Off]: Use if the authentication method is PLAIN or LOGIN.
• Off
