Network Settings
27
1
Note
❒
In
[
Effective Protocol
]
, check that the protocol you want to use is set to
[
Effective
]
.
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending file with IEEE 1394 interface
cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒
In
[
Effective Protocol
]
, check that the protocol you want to use is set to
[
Effective
]
.
Interface Setting/Network Permit SNMPv3 Communictn. As required
Interface Setting/Network Permit SSL/TLS Comm. As required
Interface Setting/Network Host Name As required
File Transfer Setting Default User Name/PW(Send) As required
File Transfer Setting Scanner Resend Time As required
File Transfer Setting Scanner Resend Setting As required
Menu User Tool Setting Requirements
Interface Setting/IEEE 1394
IPv4 Address Necessary
Interface Setting/IEEE 1394
DDNS Configuration As required
Interface Setting/IEEE 1394
Host Name As required
Interface Setting/IEEE 1394
Domain Name As required
Interface Setting/IEEE 1394
WINS Configuration As required
Interface Setting/IEEE 1394
IPv4 over 1394 Necessary
Interface Setting/Network IPv4 Gateway Address Necessary
Interface Setting/Network DNS Configuration As required
Interface Setting/Network Effective Protocol Necessary
File Transfer Setting Default User Name/PW(Send) As required
File Transfer Setting Scanner Resend Time As required
File Transfer Setting Scanner Resend Setting As required
Menu User Tool Setting Requirements
