A SERVICE OF

logo

128
To change the USB communication system, follow the steps below:
1. Disp lay the setup menu.
For the operating procedure, see P.111.
2. Pr ess the " butto n to selec t [USB
CONNE CTION] and press the $
button.
3. Pr ess the !" b utto n to select a
value.
4. Pr ess the M/O or # button.
5. If th e # button was pressed in
Step 4, press the M/O butt on.
These settings are used until they are changed the next time.
Reference
For how to transfer images using RICOH Gate La, see P.143.