119
Changing Camera Settings
Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is
displayed for a moment so you can check it.
At purchase, Confirmation Time is set to 0.5 seconds, but this can
be changed.
To change Confirmation Time, follow the steps below.
1. Disp lay the setup menu.
For detailed operation, see P.111.
2. Pr ess the " button to select [LCD
CONFIRM.] and press the $
button.
3. Pr ess the !" buttons to select
the desired setting .
4. Pr ess the M/O or # button.
5. If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Caution
When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may remain on
the monitor while the image is displayed.
Possible Settings
OFF (Photo not displayed for confirmation)
0.5 Seconds *Setting upon purchase
1 Second
2 Seconds
3 Seconds
