131
Changing Camera Settings
Changing the Startup Settings
(START SETTINGS)
To change the startup settings, use one of the settings registered in
[REG. MY SETTINGS].
1. Display the SETUP menu.
For the operating procedure, see P.109.
2. Press the " button to select [START SETTINGS] and press
the $ button.
3. Select [SETTING1] or [SETTING2]
and press the C/D or #
button.
If you do not use the My Setting function,
select [OFF] in Step 3.
4. If the # button was pressed in
Step 3, press the C/D
button.
5. Turn your camera off.
The settings to be used at the next power-on will be changed.
Note
• When [START SETTINGS] is set to [OFF], settings are retained as usual.
• When [START SETTINGS] is set to [SETTING1] or [SETTING2], the camera settings
made with [REG. MY SETTINGS] are used at power-on even if [RESTORE DEFAULTS] is
selected.
Settings Retained by My Setting Function
PIC QUALITY WHITE BALANCE
FOCUS ISO SETTING
Focal distance used in Manual Focus mode SLOW SHUTTER LMT
PHOTOMETRY ENLGE PHOTO ICON
CONT. MODE FLASH
COLOR DEPTH Scene Mode
IMAGE WITH SOUND Macro
DATE IMPRINT DENSITY
EXPOSURE COMP. DISP. Mode
