Copying
132
2
B Press [Cover/Slip Sheet].
C Select [Copy] or [Blank] for the cover sheet, and then press [OK].
D Select the paper tray that contains the sheet paper to copy the originals.
E Place your originals in the ADF,and then press the {Start} key.
Note
❒ You can set neither the copy paper for originals nor cover sheets in the by-
pass tray.
❒ When selecting [Copy] in step
C
, select whether the front and back covers
are copied 1 Sided or 2 Sided.
Designate
Use this function to have certain pages of your original copied onto slip sheets
or to insert a slip sheet for each page specified.
Important
❒ Before using this function, set the special paper tray for slip sheets.
❒ The slip sheets should be the same size and orientation as the copy paper.
❒ You cannot place the copy paper in the bypass tray.
