Changing the Machine's Settings
142
6
Set User Ratio Up to 2 reproduction ratios which you frequently use can be
registered.
A Select [Ratio1] or [Ratio 2] with the <> keys.
B Enter the ratio with the number keys. Then press the [OK]
key.
Note
❒ Default: 100 %
Initial Mode Set You can set the machine to recall program setting when the
machine is turned on or when modes are cleared.
Note
❒ Default: Normal
❒ Your service representative can store the program setting.
❒ Your service representative can select whether the program
setting is recalled when the machine is turned on or when
modes are cleared.
Key Operator Tools
Use these tools to manage use of the machine.
Note
❒ Enter a previously registered key operator code with the number keys.
Accessible Modes You can assign user codes to each color mode. Operators must
input their user codes before using each color mode (Full
Color, Black, Single Color, and Twin Color). The machine
keeps count of the number of copies made under each user
code.
A Select the color mode with the <> keys.
B Press the [Select] key.
C
Press the [Exit] key.
Note
❒ Repeat steps A and B until you finished designating color
modes.
Counter Reset You can check the number of copies made using each user
code. Also, you can clear each code's counter.
A Input the user code with the number keys.
B Press the [OK] key.
Note
❒ To clear the counter, press the [Reset] key. Then press
the [Yes] key.
C Press the [Exit] key.
Menu Description
