6. Review the information to make sure it is correct, and then
press MENU to save.
Program 1 (0ne Time)
Channel 104 Cable
Start Time 08=00 PM
End Time 09:30 PN
Start Date 11118199 Thu
Tape Speed SLP
Press CLEAR to correct
:Press MENU to save
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Remember to Leave your
cable box on and tuned
to the desired channel
TIMER RECORDING WITH THE VCR PLUS+
PROGRAM GUIDE SYSTEM
You can use the VCR Plus+ system code numbers to simplify timer
programming if you have cable TV and don't receive all channels
through a cable box, or if you receive your TV signal off-air.
SETrlNG UP THE CHANNEL LIST
If you did not set up the VCR Plus+ programming system channel
list, you can do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU
2. Display the VCR Plus+ Channel List menu
3. Go to section four, Setting Up Your VCR, if you need more
information on setting up your VCR Plus+ programming
system channel list.
USING THE VCR PLUS+ PROGRAMMING SYSTEM
1. Press MENU to bring up the VCR MAIN MENU.
VCR MAIN MENU
VCR Plus+
Timer Recodings
Time
ChanneLs
CHANNELS
Auto ChanneL Search
VCR PLus+ Channel List
Add/Remove Channels
SignaL Type: CABLE
VCR+ Channel My Channel
5 46
4 1-
3 -> -> -> 23
2 --
1 1-
Use CH+/- to select
Press 0-9 to change
Press MENU to save
gEM MAIN MENU
I VCR Plus+
2 Timer gecodings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
B Language
O Exit
2. Press 1 to display the VCR Plus+ system menu.
If you receive all channels through
your cable box on Channel 3 or 4, you
must use the regular Timer Recording
method to record programs,
32
