To change the setting back to VCR1, so the remote which came
with your VCR can control the unit, use the compatible remote to
display the PREFERENCESmenu, press 1, and then VCR on this
VCR's remote.
AUTO PLAY
This feature allows the VCR to automatically start playing a tape
when inserting a tape with the safety tab removed. In the
PREFERENCESmenu, press 2 to switch between ON and OFE
• Select ON if you want a tape with its safety tab removed to
start playing automatically when inserted in the VCR.
• Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
AUTO TV/VCR
To view a signal from a VCR connected to a TV with a standard
RF coaxial cable, the TVNCR button on the remote control must
be pressed in order to see the signal.
When Auto TVNCR isturned on, the signal will be changed to
VCR automatically, eliminating the need to press the remote
control button.
The TV must be tuned to the VCR viewmg channel (usually 3
or 4) to see the signal.
Select OFF if you do not want the VCR's signal to change
automatically to VCR when a tape is inserted and played.
ENERGYSAVER
By default, this VCR automatically turns off after two hours of
inactivity. To change the time delay, or to disable the feature,
Press 3 in the PREFERENCESmenu to switch between ON and OFE
• OFF means the VCR will remain turned on until you shut it
off.
• l:00,2:00, or3:OOmeanstheVCRturnsoffafterone, two, or
three hours of inactivity respectively.
Thirty seconds before shutting off, the VCR will warn you with a
screen reading, "The VCR will turn off in 30 seconds. Press any
key to cancel."
If you use the VCR's tuner instead of your TV to tune channels,
you may want to turn this feature off.
PREFERENCES
1 Remote Control: VCR2
2 Auto Play: OFF
3 Auto TV/VCR: OFF
4 EnergySaver: 2:00
5 Front Panel: AUTO
6 Tape Speed: SLP
7 Commercial Advance
8 Set Auto Repeat
0 Exit
The PREFERENCESmenu allows accessto many VCR
optionsincluding remote control, Auto Play,and
EnergySaver features.
19
