9
BEFORE YOU START
CONNECTING THE SPEAKERS
The speaker cords have been color-coded to simplify connection.
Plug the POSITIVE (+, red) and NEGATIVE (-, black) ends of each
speaker wire into the corresponding jacks on the rear of the player,
matching the color on the end of the speaker wire to the color-coded
connector.
Connect each of the speaker wires to the front, rear, and center
speakers respectively.
Notes:
• The positive (red) terminals are on the right.
• The negative wires are marked with black dashes.
• The longer cords are for the rear speakers and the shorter cords
are for the front speakers.
POSITIONING THE SPEAKERS
MOUNTING SPEAKERS
1. Mark the desired mounting positions on the wall.
2. Insert screws in the marked positions on the wall.
3. Align the speaker’s slot holes over the screws and pull the
speaker downward until it is firmly hooked.
4. Repeat Steps 1 – 3 to mount each speaker on the wall.
CONNECTING POWER
Make sure all the components and speakers are connected correctly.
Match the plug’s wide blade to the outlet’s wide slot, and insert the
plug fully.
31-5025.fm Page 9 Wednesday, January 15, 2003 5:05 PM
