Chapter 6 Managing the File System
Managing File System Operations
StorNext User’s Guide 98
2 From the Disk Devices list, select the device you want to label,
unlabel, or probe, and then click Label.
Labeling a Device
6
Use the following procedure to label a disk device.
1 Specify the label type by choosing VTOC or EFI at the Select Label
Type field.
2 Click Label. A message window warns you that the device might
have a file system on it, and that labeling the device will destroy any
data.
Figure 59 Labeling Warning
3 Verify that the disk you are labeling is empty, and then click OK to
close the message window. The Label Name window appears.
Figure 60 Label Name Window
4 Enter a name for the device, or accept the displayed default name and
then click OK. A message window warns you all data will be lost if
you label this device.
