User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
180
• Policy ID
Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.
• Action
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".
• Rate Limiter ID
Select which rate limiter to apply to this port. The allowed values are Disabled
or the values 1 through 15. The default value is "Disabled".
• Port Copy
Select which port frames are copied to. The allowed values are Disabled or a
specific port number. The default value is "Disabled".
• Logging
Specify the logging operation of this port. The allowed values are:
• Enabled: Frames received on the port are stored in the System Log.
• Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate is limited.
• Shutdown
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
• Counter
Counts the number of frames that match this ACE.
