A SERVICE OF

logo

- 289 -
5.6 Interface Mode Commands
The commands in this section can be executed only in the Interface execution mode.
5.6.1 bridge
Description Enter ATM-bridge configuration mode / Disable bridge port
Syntax bridge <bridge id> [disable]
Parameter
Name Description
bridge id Bridge number.
Valid values: 1-8
Default value: 1
Type: Mandatory
5.6.2 adsl-config
Description Enter adsl configuration mode
Syntax adsl-config
Parameter None
5.6.3 ipoa
Description Enter IPoA (RFC 2684) routed mode
Syntax ipoa
Parameter None