70 Audio Settings
Choose the appropriate Audio Settings for your equipment.These
settings only affect the playback of the DVD Player of the
DVD/VCR.
● Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
1
While playback is stopped, press DVD, then press
SETUP. The SETUP screen will appear.
2
Press the Number 3 button to select AUDIO.
3
Press
oo
or
pp
to select an item, then follow step 4
accordingly.
4
● If you selected DRC, press OK repeatedly to turn
Dynamic Range Control (DRC) ON or OFF.This levels the
sound volume by suppressing loud sound and raising the
volume of low sound.
● If you selected DOLBY DIGITAL, press OK
repeatedly to turn DOLBY DIGITAL ON or OFF. Select
ON if you connected the DVD/VCR to a stereo that is
Dolby Digital compatible. Details are on page 13.
● If you selected MPEG, press OK repeatedly to turn
MPEG ON or OFF. Select ON when the DVD/VCR is con-
nected to an MPEG-compatible Stereo.
● If you selected DOWN SAMPLING, press OK.
Then, press o or p to select AUTO, 48 kHz, or 96
kHz, then press OK. The AUDIO CONTROLS menu will
reappear.
Select 96 kHz if the DVD was recorded in PCM (Pulse
Code Modulation) 96 kHz. Otherwise, select 48 kHz.
5
Press SETUP to remove the menu.
• Setting DOWN SAMPLING to
96kHz activates copyright protec-
tion and mutes the sound.
Selecting AUTO sets downsampling
to 48kHz.
• MPEG represents the Motion
Picture Experts Group.
Helpful Hints
