99
RQT9428
Reference
Additional connections
Connecting a television with S VIDEO
terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
This unit’s rear panel
S Video
cable
Audio/Video
cable
(included)
Television’s rear panel
OUT
PR
P
B
Y
NENT
OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
S VIDEO
IN
AUDIO I N
R L
V IDEO
I N
Connecting a television with
COMPONENT VIDEO terminals
OPTICAL
COAXIAL
OUTO
UT
A
V1 IN
A
V1 IN
S VIDEOVIDEO
R-AUDIO-L
PR
P
B
Y
10BASE-T/
100BASE-TX
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
R- L
AUDIO IN
R L
P
R
P
B
Y
COMPONENT
VIDEO IN
Television’s rear panel
This unit’s rear
panel
Component
video cable
Audio/Video
cable
(included)
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (➡119) and provide a purer picture than the S
VIDEO OUT terminal.
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Required setting
“Component Resolution” setting in the Setup menu (➡ 93)
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some fl ickering, even if it is
progressive compatible. Set “Component Resolution” in the Setup
menu to “576i/480i” (➡ 93) and “HDMI Video Mode” to “Off”
(➡ 92) if you are concerned about it. This is the same for multi
system televisions using PAL mode.
Progressive output
DO NOT
CRT
COMPONENT
VIDEO OUT
This unit
COMPONENT
VIDEO IN
Connecting a stereo amplifi er
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
AUDIO I N
R L
OUT
A
V1 IN
S VIDEOVIDEO
R-AUDIO-L
PR
P
B
Y
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
Amplifi er’s rear panel
Audio cable
This unit’s rear panel
Connecting an amplifi er with a digital
input terminal
Required setting
“Digital Audio Output” in the Setup menu (➡ 90)
When this unit is connected to an amplifi er with an optical digital
audio cable or coaxial cable and connected to a television with an
HDMI cable, you can enjoy the highest quality of audio from the
disc by setting “HDMI Audio Output” to “Off” in the Setup menu
(➡92). In this case audio is only output from the amplifi er not the
television.
Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
■ With OPTICAL
You cannot use DTS Digital Surround decoders not suited to DVD.
OPTICAL IN
OPTICAL
COAXIAL
S VIDEOVIDEO
P
B
Y
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
Insert fully with
this side up.
Amplifi er’s rear panel
Optical digital audio cable
Do not bend sharply when
connecting.
This unit’s rear panel
■ With COAXIAL
OPTICAL
COAXIAL
S VIDEOVIDEO
-L
P
B
Y
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
COAXIAL IN
Amplifi er’s rear panel
This unit’s rear panel
Coaxial cable
Leave “Yellow” unconnected.
Convenient
functions
DMR-BW850GL_en.indb 99DMR-BW850GL_en.indb 99 2009/04/08 午前 10:01:322009/04/08 午前 10:01:32
