A SERVICE OF

logo

5
A. Locate the supplied electric water pump on the
passenger side frame rail so that the supplied 150ยบ
hose elbow connects the bottom fitting in the
reservoir to the inlet (center) barb on the pump.
B. Install the supplied eyelet onto the ground
(brown) wire of the water pump. Ground the
water pump using the sheet metal screw in the
next step.
C. Using the supplied adel clamp, secure the water
pump by drilling the frame rail and installing the
supplied sheet metal screw. (See Fig. 5-a)
D. Route the water pump power wire to a keyed
power source and attach using the supplied fuse
holder and butt connectors.
Fig. 5-a
Section 5
Water Pump Wiring
5. Water Pump Wiring