7
R7 English
With new batteries (long life alkaline batteries) you are able to measure app. 300 times under
normal conditions. Please switch off the monitor after using it. If you forget to switch the
monitor off it will switch off itself after app. 2 minutes. Please take the batteries out of the
monitor if you intend not to use the monitor for a long period (app. 2 months).
How to set the Date and Time
Before using your OMRON R7 for the first time, you have to
set the date and time. After turning the monitor on by pushing
the on/off button the initial screen (see picture) will be
available for a few seconds. After the initial screen you will
proceed automatically to the TIME SET screen. (For
instruction how to set the date and time refer also to page 16
in Chapter How to change the settings.)
After reaching the time screen you will see the Gregorian
calendar (year/day/month). The year will be flashing.
1. By using the (
) buttons you can set the current year.
2. By pushing the SET button you will lock the year and
proceed to the next item.
For setting the month, date and time repeat step 1 and 2. After
setting the minutes you will proceed to the DELETE DATA
screen. Please turn off your monitor by pushing the on/off
button. Your OMRON R7 is ready for use now.
Initial Screen
Time Screen
How to measure Blood Pressure correctly
How to wrap the cuff
In order to measure your blood pressure correctly it is needed to wrap the cuff around your
wrist in a correct way. If not, correct measurements are not possible. Please follow the coming
instructions (left wrist):
1) Make sure that your wrist is bare and will be wrapped over your skin.
2) Make sure that you clothing is not constraining the flow of your blood.
3) Make sure that the wrist (left or right) to measure is selected from the settings menu (see
also page 15). The left wrist is preset.
HEM-637-E2 EN 7/8/10 9:18 AM Page 7
