Rev. 1 - YML657 www.netcomm.com.au
NP3640 Fast Ethernet Mini Print Server User Guide Page 61
Problem No. 7 A cover page prints either on the first or the last page of the
document.
Solution No. 7 Select one of these solutions:
■ Turn the cover page feature off.
■ Insert extra page breaks in your document to avoid the cover
page printing on the first or last page of your document.
■ Install the Apple LaserWriter 7 driver. You are having trouble
printing with the Apple LaserWriter 8 driver.
Problem No. 8 Why do I have trouble printing with the LaserWriter 8?
Solution No. 8 Your application software may not be compatible with the
LaserWriter 8 driver or your system may not meet the
requirements of the LaserWriter 8 driver. Use the Apple
LaserWriter 7 driver instead.
Problem No. 9 The colors on my printed output do not match the colors on my
computer screen.
Solution No. 9 When the printer receives a color file, it tries to match the
printed output color to the screen color. Sometimes the printer
cannot match up the colors as closely as wanted. To alleviate this
problem, perform the following steps:
■ Choose "Calibrated Color/Grayscale" in the Print pop-up
menu in the Print Options dialog box. The printer will make
adjustments to match the colors.
■ Check your monitor to make sure all settings (for example,
brightness) are adjusted correctly.
Problem No. 10 When I send a print job, I get a PostScript Command error or no
print out.
Solution No. 10 Check the communication protocols. The computer, Print Server
and printer must all be configured to the same communication
protocol.(either Binary or ASCII).To configure your system:
1. Choose which protocol you are going to use. You should
check your printer; it may not give you a choice.
2. Set your printer to the correct protocol.
3. Use the computer's Print submenu to configure your
computer to use the protocol you have chosen.
4. Configure the Print Server to use the same protocol as the
printer and computer.
