A SERVICE OF

logo

Open as PDF
next previous
www.netcomm.com.au Rev. 1 - YML657
Page 14 NP3640 Fast Ethernet Mini Print Server User Guide
Windows 9x/ME Setup
Before performing the following procedure, the Print Server must be installed on your LAN, and
configured as described in Section 3. Both the Print Server and the attached printer should be
powered ON.
1. Insert the supplied CD-ROM into your drive. If the setup program does not start, run
SETUP.exe in the root folder.
2. Click Installation button, then select User Install.
3. Follow the prompts to complete the installation of the Peer-to-peer Printer Port Driver.
(Refer to the Windows section of Section 8 - Troubleshooting if there is a problem with the
installation.)
4. The Print Driver Setup will then run.
In future, you can use Start -> Programs -> PrintServer Driver -> Printer Port Setup to
run the program again.