A SERVICE OF

logo

NetComm 16 or 24 port Gigabit Switch YML711 Rev1
30 www.netcomm.com.au
System Setting
The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet
Mask and Gateway. Through the Web Management Utility, you can easily recognize the device by
using the System Name and the Location Name.
The Login Timeout sets the idle time-out for the device. If there is no activity in the Web Smart
Utility, you must re-login to continue.
Insert the IP Address, Subnet Mask and Gateway for the device and click Apply.
Figure 25. System Setting