4 NB100 Quick Start Guide
YML783 Rev1
Installing your Modem
Step 1 – Install the NB100 in your Computer
To install the NetComm NB100, you need to know how to remove the external case from your
computer and insert a PCI card. If you are unsure how to do this, consult your computer’s
documentation.
1. Ensure your computer is shut down with power off and power cable unplugged.
2. Take the cover off the CPU (central processing unit) and carefully insert the NB100
into an available PCI slot. Ensure the .’golden edge’. of the modem card is correctly
positioned so it marries correctly to the PCI slot.
3. Gently but firmly press the NB100 into the slot to ensure that it is correctly seated.
4. Plug one end of the RJ-11 telephone cable (supplied) into the matching socket on the
back the modem. Plug the other end of the cable into an ADSL-enabled telephone
outlet. If you wish to run a normal telephone from the same line, plug your telephone
into the Telecom Extension Socket however ensure that the telephone’s line is equipped
with an ADSL filter
5. Re-assemble your PC by slipping the external case back on. The hardware installation of
your unit is now complete.
