2 NB100 Quick Start Guide
YML783 Rev1
Contents
Introduction ........................................................................................................ 3
What’s in the box ........................................................................................... 3
Minimum System Requirements ........................................................................ 3
Installing your Modem .......................................................................................... 4
Step 1 – Install the NB100 in your Computer ...................................................... 4
Do you need a Line Filter or Splitter? ................................................................. 5
Step 2 – Install the Modem Driver ..................................................................... 5
NB100 Modem Analyzer Utility ............................................................................. 6
General Tab ................................................................................................... 7
Statistics Tab ................................................................................................. 8
Spectrum Tab ................................................................................................. 9
Configuration Tab ......................................................................................... 10
How to Uninstall the NB100 Modem ..................................................................... 11
Appendix A: Cable Information ............................................................................ 12
Appendix B: Glossary ......................................................................................... 14
Appendix C: Registration and Warranty Information .............................................. 18
Caution
The NetComm NB100 must be installed and operated in accordance with
the instructions provided in this Quick Start Guide. Damage caused by
incorrect or careless installation is not covered by warranty.
Static Electricity
Computers are very sensitive to static electricity which may be
discharged by the user when the internal circuitry is touched. Ensure that
you have discharged any static prior to touching the computer’s PCI slots
and to removing the NetComm NB100 from its static bag, by touching an
earthed object first. This can be the computer’s Power Supply provided
the power is switched off at the wall, but the power cord is connected
to the power socket; static will be discharged through the power cord’s
earth connection.
