16
SX 35 DSC
MENU
Opens menus to select optional settings to personalize your
transceiver’s operation.
HI/LO
Use to toggle transmitter power between 25 watts and 1 watt out-
put. Certain channels are restricted to 1 watt maximum power and
will cause the error beep if the HI/LO key is pressed.
END
Cancels DSC calls and Emergency/Distress calls.
16
Selects the Primary Calling Channel 16 or the last channel used. Also,
cancels DSC and Emergency/Distress calls.
ENT
Used to complete editing or selection of options from menus. Use
to delete channels in All Scan function.
SCAN
Can be used alone or with the MEM key to select Priority Scan,
Memory Scan or All Scan.
MEM
Stores channels in the scan memory bank, and when used with the
SCAN key, starts Memory Scan.
CALL
Initiates DSC operation screens.
Keypad, Microphone
The microphone keypad is used to change channels by directly entering the
actual channel number with the
0
through
WXYZ
9
keys. The
ENT
or
EXIT
keys step or scroll to a new channel. The microphone keys are used to enter
alphanumeric characters and symbols shown in the following chart.
syeKenohporciM
01
CBA
2
FED
3
IHG
4
LKJ
5
ONM
6
SRQP
7
VUT
8
ZYXW
9
ecneuqeSretcarahCciremunahplA
01ADGJMPTW
ecapS-BEHKNQUX
(,CFILORVY
).?!:#'S&Z
%/ 23456789
