English
20
3. SCREENMANAGER
3-4. Useful Functions
Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
[To lock]
Switch off the monitor’s power by the Power button. Press on the Auto adjustment
button while switching on the monitor’s power.
[To unlock]
Switch off the monitor’s power by the Power button, then hold down the Auto
adjustment button once again and turn the power back on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state
after a predetermined amount of time has lapsed. This function was created to reduce
afterimage characteristics that are particular to LCD monitors when the monitor
screen is left on for a long period without use.
[Procedure]
(1) Select <Off Timer> in the ScreenManager <Others> menu.
(2) Select “Enable” and press the Right and Left buttons to adjust the “On Period”
(1 to 23 hours).
[Off Timer System]
*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor
automatically enters the “Power Off” mode. To delay entering the “Power Off” mode,
press the power button during the advance notice period. The monitor will continue to
operate for an additional 90 minutes.
Locked function z Settings in the ScreenManager
z Auto adjustment button adjustments
Unlocked function z Power button
z Selecting of the FineContrast mode by the FineContrast button
z Brightness adjustment by Control buttons
z Sound control by the Control buttons
z Input signal selection button
PC Monitor Power Indicator
On Period (1H - 23H) Operation Blue
Last 15 min. in “On period” Advance Notice *
1
Blue Flashing
“On period” expired Power Off Off
