A SERVICE OF

logo

English
2. CABLE CONNECTION
13
2-2. Connecting the Signal Cable
NOTE
z Before connecting the product, set up the monitor after
unfolding the base of the stand.
z Be sure that the power switches of both the PC and the monitor
are OFF.
z How to Adjust the Monitor or Angle Grip both side of the monitor
firmly with both hands and adjust the monitor height or angle as
desired.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector of the PC PC
MD-C87 (enclosed) Video Output Connector/
D-Sub mini 15 pin
z Standard graphics card
z Macintosh G3 (Blue &
White) / G4 (VGA)
MD-C87
(enclosed) + Adapter (Optional)
Video Output Connector
D-Sub 15 pin
z Macintosh
Power Cord