A SERVICE OF

logo

Properties settings
5
Pi4700e 5-27
Printer Driver for Linux Chapter 5
Tip for (1)
The tray containing the paper on which the body of the document is to
be printed is displayed in green on the Printer Figure.
Note for (2)
When using the OHP interleaving function, set the number of sets of
prints to 1.
You cannot select the same paper take-up port for both Paper Source
and Interleaving Paper Source.
You can set only Manual Feed using Paper Source.
OHP interleaving and two-sided printing cannot be set simultaneously.
Tip for (2)
The OHP film tray is displayed in green on the Printer Figure.