A SERVICE OF

logo

8 b. Spacer strip for
the rear of the appliance
Measure the gap T to be covered
between the rear of the appliance
and the wall.
Use a knife to trim the spacer strip
supplied to measurement T.
Stick the spacer strip to the under-
side of the appliance.
Turn the side cover caps upwards
and press into position.
9 a. Set up for vented
extraction
Insert the panel supplied into the slot
for the Active Charcoal Filter.
Secure the ventilation ducting over
the vent socket on the venting hood
using a hose clip.
Complete venting installation. (See
Connection for air extraction).
Installation
33