b
1 hose clip for securing the vent
ducting to the vent connection.
c
1 reducing collar
for exhaust ducting of a 5” (125 mm).
d
1 non-return flap
for fitting into the vent connection.
e
2 runners
(1 x right, 1x left) to support the ap-
pliance in the cabinet.
f
2 spacer blocks
for installing the appliance in a 27
9
/
16
”
(70 cm) wide cabinet.
g
2 cover caps
(1 x right, 1x left) and two inserts
h
for
covering the suppport rails when install-
ing in a 27
9
/
16
” (70 cm) wide cabinet.
i
2 side spacers
to cover the spaces at the side when in-
stalling in a 23
5
/
8
” (60 cm) wide
cabinet.
j
Active Charcoal Filter slot
for inserting the Active Charcoal Filter.
k
1 spacer strip
to cover the gap between the rear of
the appliance and the wall.
8 screws 4.0x16 mm
For securing the runners
e
in a 23
5
/
8
” (60 cm) wide cabinet.
or for securing the spacer blocks
f
in
a 27
9
/
16
” (70 cm) cabinet.
12 screws
3.5x9.5 mm
8 screws for securing the runners e to
the spacer block
f
(when installing in
a 27
9
/
16
” (70 cm) wide cabinet).
4 screws for securing the side spacers
i
.
Screwdriver for aligning the cabinet
door after the appliance has been in-
stalled.
Installation
27
