42
Audio Settings
Settings for audio output are made.
Audio Output
Default settings are underlined.
Set the audio output.
Setting items Setting details
HDMI
Sets the audio format output
from the HDMI output
connector.
Bitstream : For selecting when the device connected to the unit supports
Dolby TrueHD/Dolby Digital Plus/Dolby Digital or DTS-HD/DTS Digital
Surround. The output format is automatically selected according to the
audio format or the number of channels supported by the connected
HDMI device.
PCM : For selecting when a device connected to the unit does not support
Dolby TrueHD/Dolby Digital Plus/Dolby Digital or DTS-HD/DTS Digital
Surround.
Off : For outputting no audio signal from the HDMI output terminal of the
unit.
For converting audio signals, see “About digital signal audio output”
(vpage56).
NOTE
If “BD Audio mode” is set to “HD Audio Output”
with OPTION on the remote control, BD secondary
audio and interactive audio are not output.
Dynamic Range
Compression
Compresses the dynamic
range of Dolby TrueHD/
Dolby Digital Plus/Dolby
Digital Audio.
Off : Dynamic range is not compressed.
On : Dynamic range is compressed.
Auto : Dynamic range of Dolby TrueHD audio is automatically compressed
according to the material. Audio of Dolby TrueHD only is compressed.
This setting compensates high volume to low and low volume to high
when high volume is not desired at night.
System Information
MAC address is displayed.
MAC Address
Displays the MAC address.
Items
MAC address
