10
System Options (Continued)
Welcome Display Text
The AE-100 display will show a visitor a welcome message alternating
with instructions on how to fi nd and call a resident. The welcome message
can be customized to suit the installation.
✦ NOTE: This step cannot be performed remotely through the telephone.
1. Press
✦ NOTE: To enter capital letters only, press fi rst before entering the text.
2. Enter the new text for the top line of the display (up to 16 characters).
3. Press
✦ NOTE: To enter capital letters only, press fi rst before entering the text.
4.
Enter the new text for the bottom line of the display (up to 16 characters).
5. Press
Automatic Telephone Answer
The factory setting will allow the system to detect a ring signal on the
telephone line and answer the call.
✦ NOTE: The automatic answer feature can be turned off, although remote
programming, remote access control by residents, and resident call-back
features will no longer function.
1. Press
2. Select the option for automatic telephone answering:
Enter 0 to turn OFF automatic telephone answering.
Enter 1 to turn ON automatic telephone answering.
3. Press
Speaker Chirp on Keystrokes
The factory setting will cause the speaker to chirp when each key on the
keypad is pressed. Alternately, the speaker chirp can be turned off.
1. Press
2. Select the option for keystroke speaker chirps:
Enter 0 to turn OFF the keystroke speaker chirps.
Enter 1 to turn ON the keystroke speaker chirps.
3. Press
Speaker Tone on Access Relay Activation
The factory setting will cause the speaker to sound a tone for two seconds
when the access relay is activated. Alternately, the tone can be turned
off.
1. Press
2. Select the option for access relay activation tone:
Enter 0 to turn OFF the access relay activation tone.
Enter 1 to turn ON the access relay activation tone.
3. Press
•
•
•
•
•
•
225787 IMAGE 10
PPN 63
63#TONE#
TONE = 0 FOR ACCESS RELAY TONE OFF
TONE = 1 FOR ACCESS RELAY TONE ON
SPEAKER TONE ON ACCESS RELAY ACTIVATION
FACTORY SETTING: RELAY TONE ON
PPN 61
61#ANSWER#
ANSWER = 0 FOR AUTO ANSWER OFF
ANSWER = 1 FOR AUTO ANSWER ON
AUTOMATIC TELEPHONE ANSWER
FACTORY SETTING: AUTO ANSWER ON
PPN 62
62#CHIRP#
CHIRP = 0 FOR KEYSTROKE CHIRP OFF
CHIRP = 1 FOR KEYSTROKE CHIRP ON
SPEAKER CHIRP ON KEYSTROKE
FACTORY SETTING: KEYSTROKE CHIRP ON
PPN 57
57#LINE 1#LINE 2#
LINE 1 = UP TO 16 CHARACTERS TEXT
LINE 2 = UP TO 16 CHARACTERS TEXT
WELCOME DISPLAY TEXT
FACTORY SETTING: LINEAR ACCESS TELEPHONE ENTRY
STANDARD PROGRAMMING METHOD
