Setup
PagePrinter Network Adapter: Utilities & Environments 2-9
TCP/IP
networks
2 Using the printer’s operator panel, make sure that BOOTP is disabled.
We recommend that you leave BOOTP disabled if you are not using it to set
IP addresses. If you need help, follow these steps:
a Turn the printer power On (|).
b Use the printer control panel to select the menu item SETUP
NETWORK MENU. Consult your printer documentation to learn the menu
path for your specific printer, or scroll through the control panel menus
until you find it.
c Select SETUP NETWORK MENU.
d Select Enable BOOTP.
e Select No.
If you are instructed to do so, turn the printer off.
f When you are finished, select Ready.
3 Set up the printer’s hostname (network name) in the computer. To do so,
simply define the printer’s IP name and address in the /etc/hosts file or on the
name server.
This address must match the IP address you set earlier on the printer’s
control panel. You may want to use a hostname that is meaningful in
your environment (for example, a name that identifies the printer’s
location).
